PTC® recommends aluminum verification blocks be used as a field check of the durometer. They provide an indication if the durometer is mechanically sound prior to use. The block is a combination depth gauge and spring force gauge designed to provide consistent results in a wider temperature range than rubber or plastic blocks. The value of each block is measured using a certified durometer. ASTM D2240 states that test blocks are not to be used as calibration standards. The calibration procedure for a durometer includes mechanical, dimensional and force curve measurements as stated in Section 7. For NIST traceable durometer calibration please contact PTC Metrology™.
Aluminum Durometer Test Blocks Dimension: 7/16" x 2.25" x 3/4"