The world's most trusted name
in Durometers & Thermometers
0 item(s) in cart/ total: $0
> 0° to 500°F Magnetic Surface Thermometer 313F
0° to 500°F Bimetal Magnetic Surface Thermometer
0° to 500°F Magnetic Surface Thermometer 313F
Add Surface Temperature Calibration Certificate
3 Point N.I.S.T. Traceable A2LA ISO/IEC 17025 [+$135.00]
Put me on the Waiting List
Add to Cart
Accredited by A2LA to ISO/IEC 17025, ANSI/NCSL Z540-1.
Made in the U.S.A.
Bimetal Surface Thermometer 0° to 500°F with dual magnets.
PTC® Quality -- Made in the U.S.A.
Accuracy of ±2% of Full Scale Range
NIST Certification Available
Every Unit Individually Calibrated
Accuracy ±2% of full scale range.
Time constant from 0.06 to 1 minute (depending on the range)
Diameter 2 in. (5.1 cm).
Height 1/2 in. (1.3 cm).
Weight 1-1/2 oz. (43 g).
Shipping weight 1 lb. (454 g).
PTC Metrology™ provides temperature calibration and certification services.
Many quality assurance systems require that calibrated and certified thermometers be used where accurate measurements are of importance. PTC® has calibrated thermometers for over 60 years and is now accredited by A2LA to ISO/IEC 17025 and ANSI/NCSL, Z540-1. Please download our
scope of accreditation from A2LA.
This certification will contain the as received and as returned calibration results of the UUT at 3 points across the UUT's temperature scale. In addition to the readings, certification will include laboratory conditions, information on the primary standards and a statement of uncertainty. Add NIST/A2LA (ISO 17025) Certification 3 Logged Points PTC®'s Choosing (between ambient and 390°C)
Certifications will include; as received and as returned data; a statement of uncertainty; laboratory conditions; and information on the primary standards.
In temperature calibration, PTC® has chosen primarily products from Hart Scientific, which supplies most national and international standards labs with calibration equipment. The Hart Scientific Super Thermometer 1575A is center stage along with several SPRT’s featuring calibration traceable to the fixed points of the ITS-90 temperature scale. A water triple point cell (0.01°C ±0.0001) is used to correct any drift that the SPRT may experience on an ongoing basis.
Designed for hospitals and industrial applications such as: pipe surfaces, weld preheats, boilers, cylindrical tanks, motors, generators, engines, bearings, hot plates, griddles, die-cast dies, foundry core boxes and annealing ovens.
3 Point Temperature Certification-CERTTempA
0° to 500°F & -20° to 250°C Dual Scale Magnetic Surface Thermometer 313DS
0° to 500°F Magnetic Surface Thermometer Ancillary Hand 313FL
0° to 500°F Magnetic Surface Thermometer Max-Min Hands 313FMM
Recently Viewed Items